HomeBrandsSchopes - Colette Series - Capsules - MK 8

Colette MK 8 Capsule

Figure-8

The MK 8 is often used for M/S and double M/S stereo sound in film sound and music recording, in combination with Colette or CCM microphones and/or a CMIT shotgun microphone.

This type of capsule is a pure dipole. The figure-eight pattern of the MK 8 remains constant from low to high frequencies, which is particularly important when used in an M/S setup. Its sensitivity rolls off more at low frequencies than other capsules, but proximity effect (which can compensate, given relatively close placement) is also more pronounced.

Production of the MK 8 is a special technical accomplishment, because in terms of physics, the available force due to the pressure gradient is minimal. Despite this, the MK 8 has excellent frequency and polar response, near-perfect front/back symmetry, and low inherent noise.

The microphone is comparatively sensitive to solid-borne sound as well as wind and breath noise. Good protection should be considered, e.g. suitable wind screening and/or shock mounting.

The pickup direction is lateral, i.e. perpendicular to the microphone housing, and the 0° and 180° axes are indicated respectively by red and black dots on the capsule housing. When recording with M/S, the 0° axis (as viewed from a position behind the microphone) should point to the left, and the "8" engraved on top of the capsule should be precisely horizontal.


  • Figure-8 characteristic (pure pressure-gradient transducer)
  • Pickup direction: Lateral (perpendicular to the microphone axis)
  • 0°-axis marked with a red dot
  • Preferred application: M/S, double M/S and "Blumlein" stereo

     


Order number

 

  •  No. 131105

Description

The MK 8 is often used for M/S and double M/S stereo sound in film sound and music recording, in combination with Colette or CCM microphones and/or a CMIT shotgun microphone.

This type of capsule is a pure dipole. The figure-eight pattern of the MK 8 remains constant from low to high frequencies, which is particularly important when used in an M/S setup. Its sensitivity rolls off more at low frequencies than other capsules, but proximity effect (which can compensate, given relatively close placement) is also more pronounced.

Production of the MK 8 is a special technical accomplishment, because in terms of physics, the available force due to the pressure gradient is minimal. Despite this, the MK 8 has excellent frequency and polar response, near-perfect front/back symmetry, and low inherent noise.

The microphone is comparatively sensitive to solid-borne sound as well as wind and breath noise. Good protection should be considered, e.g. suitable wind screening and/or shock mounting.

The pickup direction is lateral, i.e. perpendicular to the microphone housing, and the 0° and 180° axes are indicated respectively by red and black dots on the capsule housing. When recording with M/S, the 0° axis (as viewed from a position behind the microphone) should point to the left, and the "8" engraved on top of the capsule should be precisely horizontal.


Technical Specifications
Pickup patternFigure-of-eight
Frequency range40 Hz - 15 kHz with CMC6,
40 Hz - 15 kHz with CMC6xt (above 20 kHz, the level of -3 dB for the cutoff frequency is not exceeded despite the xt boost)
Sensitivity-38,5 dB (V/Pa), 12 mV/Pa with CMC 6
Equivalent noise level (A-weighted)17 dB with CMC 6
Equivalent noise level (CCIR)26 dB with CMC 6
Signal-to-noise ratio (A-weighted)77 dB with CMC 6
Maximum sound pressure level (THD < 0.5 %)133 dB-SPL with CMC 6
Length34 mm
Diameter20 mm
Weight18 g
Surface finishmatte gray (g) or custom color

Graphics

Polar Diagram MK 8 + CMC 6

Polar Diagram MK 8 + CMC 6

Frequency Response MK 8 + CMC 6

Frequency Response MK 8 + CMC 6


Downloads

Variants & Options

No. 191701 matching: Although our normal production tolerances are very close, we can deliver specially matched capsule pairs for a small extra charge.
No. 191102 custom color
No. 191201 custom engraving